Starting The Configuration/Setup Utility Program; Choices Available From The Configuration/Setup Main Menu - IBM xSeries 200 Hardware Maintenance Manual

Starting the Configuration/Setup Utility
program
Complete the following steps to start the
Configuration/Setup Utility program:
1. Turn on the server and watch the monitor screen.
2. When the message Press F1 for
Configuration/Setup appears, press F1.
3. Follow the instructions that appear on the screen.
Choices available from the
Configuration/Setup main menu
From the Configuration/Setup Utility main menu, you can
select settings that you want to change. The
Configuration/Setup Utility main menu is similar to the
following illustration:
CMOS Setup Utility - Copyright (c) 1984 - 2000 Award Software
Note:
1. You can press F1 to display help information for
a selected menu item.
2. The choices on some menus might differ slightly
from the ones that are described in this book,
depending on the BIOS version in the server.
Descriptions of the choices that are available from the
main menu are as follows:
v System summary
Select this choice to display configuration information.
This includes the type and speed of the microprocessors
and the amount of memory that is installed.
Changes that you make to configuration settings appear
on this summary screen. You cannot edit the fields.
This choice appears on both the full and limited
Configuration/Setup Utility menus.
34
Hardware Maintenance Manual: xSeries 200
Configuration/Setup Utility
Select Option:
System Summary
Product Data
Devices & I/O Ports
Start Options
Frequency Control
Date and Time
System Security
Advanced Setup
Power Management Setup
Save & Exit Setup
Load Optimized Defaults
Exit Without Saving
Move Enter: Select F1: General Help
F10: Save ESC: Exit