Remote Control - Eiki LC-WB200W Owner's Manual

①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
① ON/STAND-BY button
Turn the projector on or off. (pp.18-20)
② AUTO SET button
Execute the setting of Auto setup (includes
Input search, Auto PC adj. and Auto Keystone
functions) in the setting menu. (pp.23, 45)
③ COMPUTER 1/2 buttons
Select the COMPUTER 1 or COMPUTER 2
input source. (pp.27, 37)
Note:
To ensure safe operation, please observe the
following precautions:
– Do not bend, drop or expose the remote control
to moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, spray, or any chemical material.
Part Names and Functions
Remote control
④ VIDEO button
Select the VIDEO input source. (p.36)
⑤ S-VIDEO button
Select the S-VIDEO input source. (p.36)
⑥ Point ▲▼◄► buttons
– Select an item or adjust the value in the
On-Screen Menu. (p.24)
㉒
– Pan the image in the Digital zoom +/-
mode. (p.35)
㉑
⑦ SCREEN button
Select a screen mode. (pp.26, 34-35, 42-43)
⑳
⑧ MENU button
Open or close the On-Screen Menu. (p.24)
⑨ FREEZE button
Freeze the picture on the screen. (p.25)
⑩ NO SHOW button
⑲
Temporarily turn off the image on the screen.
(p.26)
⑱
⑪ D.ZOOM ▲▼ buttons
⑰
Zoom in and out the images. (pp.25, 35)
⑯
⑫ VOLUME +/- buttons
⑮
Adjust the volume level. (p.24)
⑭
⑬ MUTE button
Mute the sound. (p.24)
⑬
⑭ IMAGE button
Select the image mode. (pp.26, 32, 40)
⑮ PIP button
Operate the Picture in Picture function
(p.25).
⑯ P-TIMER button
Operate the P-timer function. (pp.26, 52)
⑰ LAMP button
Select a lamp mode. (pp.25, 54)
⑱ INFO. button
Operate the information function. (p.59)
⑲ KEYSTONE button
Correct keystone distortion. (p.23)
⑳ SELECT button
– Execute the selected item. (p.21)
– Zoom in or out the image in Digital zoom
mode. (p.35)
㉑ COMPONENT button
Select the COMPONENT input source. (p.37)
㉒ HDMI button
Select the HDMI input source. (p.37)
11