Table of Contents
Advertisement
Removing/Installing Drives
Removing Drive Carriers from the Chassis
1. Slide the handle lever on the drive carrier up to unlock the carrier handle. This releases
and extends the drive carrier handle.
2. Extend and use the handle to pull the carrier out.
Caution: Except for short periods of time (swapping drives), do not operate the server with
the drive carriers removed from the bays, regardless of how many drives are installed, for
proper airflow.
Chapter 3: Maintenance and Component Installation
Handle Lever
Figure 3-9. Unlocking Handle
Figure 3-10. Removing a Drive Carrier
63
Advertisement
Table of Contents
Troubleshooting
