Where To Go From Here - Motorola AP-7131N-FGR Installation Manual

3.5 Where to Go From Here?

Once basic connectivity has been verified, the access point can be fully configured to meet the needs
of the network and the users it supports. The sections referenced below are located within the
AP-7131N-FGR Access Point Product Reference Guide. The guide is available on the Motorola Web
site, at https://support.symbol.com/support/product/FIPS_and_CC_Compliant_Products.html.
• Refer to Chapter 4 to define System Settings (beyond the scope of the Quick Setup screen),
configure access point device access, set SNMP values, log system events, set the access
point system time and import device firmware and configuration files.
• See Chapter 5 for information on configuring the access point LAN and WAN ports, define
up to 16 individual WLANs and their QoS policies and configure access point router settings.
• Refer to Chapter 6 for detailed information on configuring specific encryption (WPA2/CCMP)
and authentication (802.1x EAP) security schemes, as well as VPN tunnel configuration and
use case information.
• See Chapter 7 for information on accessing statistics helpful in monitoring the connection
between the access point and its connected devices.
• Refer to Chapter 8 for information on using the access point Command Line Interface (CLI),
as accessed through the serial port or Telnet.
• See Appendix A for device specifications for both the AP-7131N-FGR.
Basic Configuration 37