The System Information Screen - Hardware Components - Micros Systems Workstation 4 Setup Manual

Workstation 4 Diagnostics
Workstation 4 Diagnostics Utility
System Information Screen - Hardware Components
When the WS4 Diagnostics Utility is started, it displays the System
Information screen, shown in Figure 4-1, below. The following section details
each of the hardware components found on this screen.
Figure 4-1: The System Information Screen (Hardware Platform)
The System Information screen combines many of the WS4 hardware and
software components into a central location. In general, the left half of the
screen displays hardware related information, while the right half displays
information about the software platform components. A brief description of the
hardware components follows.
Diagnostic Version
This field displays the WS4 Diagnostic Utility Software Version.
Hardware Revision
This field displays the WS4 System Board hardware revision. It is read
directly from the system board by the WS4 API. Most current units in the
field will include Revision D through G system board. There is very little
difference between these boards in terms of feature set.
However, in the September-October 2004 time frame, the Revision I
System Board will appear. This system board adds new features and
capabilities and ships with the GR1.2 software platform files. These
workstations will also ship with the Sharp LCD and use different LCD and
Backlight cables. Details on this board will be included in a future release
of the WS4 Field Service Guide.
4-6 Workstation 4 Setup Guide