Driver-Specific Information - Micros Systems Restaurant Enterprise 3700 POS Reports Manual

&$('& 5HSRUWV
'ULYHU6SHFLILF ,QIRUPDWLRQ

Driver-Specific Information

Much of the Credit Card Batch Transfer Status Report includes driver-
specific information. Status and error messages are often similar, but not
the same, for different drivers. This section lists the messages for each
driver that may appear on this report.
:KHUH ,QIRUPDWLRQ $SSHDUV
Driver-specific information shows up in two areas on the report:
Batch # 37 - Sunday, Sep 15, 1996 - Settlement Driver: MAPP
Batch Reference: 0262
Attempt #1 - 1996/09/16 01:30:21.41 Previous Settle Count - 0
¨
Forward Count: 14 Forward Balance: 381.10
Driver-specific
Terminal ID: F259096170330
*CLS0262 CNT 014>BAL 381.10 >CIC 299061
Omitted Record Summary
Rec #
1 372430136619005
Any message that begins with an asterisk (*) comes directly from the
credit card processor. MICROS does not have information about these
messages. You must contact the credit card processor directly if you need
to know what they mean.
+RZ 7R 8VH 7KLV 6HFWLRQ
This section explains the messages that appear in the batch status section
of the report. The first table lists generic messages that may appear for
any driver, no matter which one you're using. The rest of the tables list
driver-specific messages.
Find the driver that your restaurant uses. (Drivers are listed in
alphabetical order.) Then, in the table for that driver, find the specific
message you need explained.

Account # Exp Date Chk#
04/98 1832
Note
All driver-specific messages that appear in the Omitted
Description field (in the Omitted Record Summary of the
report) come directly from the credit card processor. Therefore,
they are not described here.
2 - CROMPTON PETER
Omitted Flag Omitted Description
D DUPLICATE TRANS>96389
Driver-specific
¦
(only if this flag is "D")
Chg Tip Total
7.00 52.74