Workstation 4 Power Management State Table - Micros Systems Workstation 4 Setup Manual

Workstation 4 Power Management State Table

Fig Current
1-11 State
1 UNPLUGGED
2 NOPOWER
3 NOPOWER
4 NOPOWER
5 ON
6 ON
7 ON
8 ON
9 SUSPEND
10 SUSPEND
11 SUSPEND
12 SUSPEND
13 ON
14 ON
15 NOPOWER
16 SUSPEND
17 ON
Figure 1-16: WS4 Power Management States
Workstation 4 Setup Guide
Event Source
AC Power AC Power becomes available and
the last recorded state was not the
ON or SUSPEND state.
Operator The operator presses the power
button for less than 5 seconds.
Operator The operator presses the power
button for more than 5 seconds.
Server Application A server application sends a
'Wake On LAN' command.
Operator The operator presses the power
button for more than 5 seconds.
Operator The operator presses the power
button for less than 5 seconds.
WS4 Application The application shuts down the
workstation.
WS4 Application The application places the WS4 in
SUSPEND state.
Operator The operator presses the power
button for less than 5 seconds.
Operator The operator presses the power
button for more than 5 seconds.
Server Application A server application sends a
'Wake On LAN' command.
WS4 Application The WS4 application calls an
application program at a
predetermined time.
Server Application A server application sends a
"Wake On LAN" command.
WS4 Application Warm boot is called by the
application.
AC Power Failure AC Power Fails, then is restored
AC Power Failure AC Power Fails, then is restored
AC Power Failure AC Power Fails, then is restored
What is The Workstation 4?
Power Management States
Scenario New State
NOPOWER
ON
ON
ON
NOPOWER
SUSPEND
NOPOWER
SUSPEND
ON
NOPOWER
ON
ON
ON
NOPOWER
then ON
NOPOWER
NOPOWER
ON
1-19