Workstation 4 Diagnostics Utility; Update Highlights; Running The Ws4 Diagnostics Utility - Micros Systems Workstation 4 Setup Manual

Workstation 4 Diagnostics Utility

The Workstation 4 includes a diagnostics utility located on the Disk On Chip.
Based on the DEMODIAG utility found in the MICROS PC Workstations, the
WS4 Diagnostics Utility includes a comprehensive test of the internal
hardware and peripherals including IDN printing devices.

Update Highlights

The Diagnostics Utility continues to be updated to support the latest
enhancements. Listed below are some of the features and bug fixes that have
been added since release.
Version 1.87
Boot Loader version display bug. Boot Loader version 2.010 now
o
correctly displays as 2.0.10.
LCD Display Test - now displays up to five solid colors on the Operator
o
LCD to assist in detecting hot or cold pixels.
Version 1.90 (Included with GR 1.2)
System Info Dump. A new button on the System Info screen writes all
o
values to a text file called WS4Dump.txt on the root of the CF Card.
Rear and Pole LCD Customer Display Support - New tests include
o
Backlight Control, Contrast Adjust, Pixel ON/OFF, Reset, firmware
version reporting and firmware upgrades. The LCD Customer Display
can operate on Revision D through G system boards, but a Revision I
system board must be used to perform firmware upgrades.

Running the WS4 Diagnostics Utility

The diagnostics utility is included in the utilities folder of the Disk On Chip.
Procedure:
1. From the Desktop, touch the My Computer icon twice.
2. Touch the DOC icon twice.
3. Touch the Utilities folder twice.
4. Touch the 'DiagUtilty' icon twice to start the WS4 diagnostics utility.
The WS4 Diagnostics utility starts and displays the System Info
o
Screen, described in more detail in the next section.
Workstation 4 Setup Guide
Workstation 4 Diagnostics
Workstation 4 Diagnostics Utility
4-5