Important Safety Information; Safety Guidelines - 3D Systems Cube 2nd Generation User Manual

3
EN

IMPORTANT SAFETY INFORMATION

Safety Symbols and Definitions
Hot Surface Hazard: A hot surface is accessible in the vicinity of this sign or at the printjet; avoid contact. Hot surfaces
can cause severe burns.
Caution: Indicates something may happen that could cause loss of data, damage to equipment, or personal injury.
Caution: Indicates a pinch point hazard that could cause person injury.

Safety Guidelines

• Follow all safety rules in this section and observe all cautions and warnings in this guide.
• Do not modify any safety features or make modifications to the Cube. Doing so is prohibited and voids warranty.
• Use of print materials, or 3D prints other than genuine 3D Systems® components may void warranty.
• Adult supervision is required; observe children closely and intervene as necessary to prevent potential safety
problems and ensure the Cube's appropriate use. Ensure small 3D prints are not accessible to young children.
These 3D prints are potential choking hazards for young children.
• When the Cube is operating, the print tip on the printjet becomes hot; avoid touching this area until it has cooled
down.
• Do not change color of material during printing; doing so may damage the Cube.
6