Set Up A Computer (Wps) Network - 3D Systems Cube 2nd Generation User Manual

4. Open your "Internet Access" Located in your Network Set-
tings.
Note: Always select your Cube from your network settings be-
fore opening Cubify Software.
5. Scroll and select your Cube on the menu. Click on "con-
nect." This may take several minutes to connect. Once
connected, you can send print files from Cubify software
straight to your Cube.

Set up a computer (WPS) network

WPS (WI-FI Protected Setup) allow easy establishment of a secure wireless network. All new wireless-routers are set up for
WPS. To be sure, look for the WPS logo on your wireless-router box. WPS connection will allow you to connect to your printer
through the Cubify Software.
1. Press and hold the WPS button on your wireless-router
until the button starts flashing.
2. Open your "Internet Access" located on your computer's
taskbar.
3. Scroll and select the network for your router on the menu.
Click on "connect." This may take a few minute to connect.
4. Tap on "SETUP" in the main menu and scroll until you come to the WI-FI set up screen
32
Tap Here