Aborting Your Print - 3D Systems Cube 2nd Generation User Manual

2. Tap "Print" on the touchscreen and use left or right arrows until you see your Cube file displayed.
Tap
Here
3. Tap on your .Cube file; the print touchscreen will appear showing the total time it will take to print your creation and the
time left to complete it during printing. It also shows the maximum height of your creation and the current height while
printing.
4. The Cube will begin a ten minute heating process. During the heating process, the print tip and the print pad will reach
the temperatures that have been preset by the manufacturer. Once these temperatures are reached, your creation will
begin to print. Once the creation is finished printing, your touch screen will display "Print Finished," press the check box
to confirm. Wait until the print pad is completely cool before removing your print.

Aborting Your Print

To abort your creation during warm up or printing, finger tap the STOP button on touchscreen. The next screen will read
"Are you sure you want to abort the print?" Finger tap the check box to abort or tap the X box to cancel. Wait until the print
tip and the print pad completely cools before touching.
46
Tap
Here
WARNING – PRINTJET NOZZLE TIP
BECOMES EXTREMELY HOT DUR-
ING SET-UP AND OPERATION. DO
NOT TOUCH NOZZLE.
WARNING – PRINTJET NOZZLE TIP BE-
COMES EXTREMELY HOT DURING SET-
UP AND OPERATION. DO NOT TOUCH
NOZZLE.