Maintaining Your Cube; Cleaning The Exterior; Cleaning The Print Pad; Cleaning The Print Tip - 3D Systems Cube 2nd Generation User Manual

26

MAINTAINING YOUR Cube

Cleaning the Exterior

• Clean the Cube's exterior with a lint free cloth and water.
Dampen the cloth with water and wipe the outer surfaces of
any debris that is visible.

Cleaning the Print Pad

• Submerge print pad in a container filled with warm city (tap)
water. Please do not use well water; it contains certain min-
erals that may make your creation difficult to remove from
the print pad.
• Rinse pad under tap water and dry using a lint free wipe.

Cleaning the Print Tip

• Using the small pliers, pull away any plastic debris away from the nozzle tip.
• If the debris is stubborn, the nozzle may need to be heated to make the debris soft
enough to remove.
WARNING – PRINTJET NOZZLE TIP
BECOMES EXTREMELY HOT DUR-
ING SET-UP AND OPERATION. DO
NOT TOUCH NOZZLE.
53