Understanding Printer Messages - Fuji Xerox DocuPrint CM225FW User Manual

Understanding Printer Messages

The printer touch panel displays messages describing the current state of the printer and indicates possible printer
problems you must resolve. This section describes error codes included in the messages, their meanings, and how
to clear the messages.
IMPORTANT:
• When an error message is displayed, the print data remaining on the printer and the information accumulated in the memory
of the printer are not secured.
Error Code
005-121
005-301
009-950
009-951
009-952
009-953
010-397
016-315
016-317
016-372
016-501
016-502
016-503
016-504
016-506
016-507
016-718
016-719
016-720
016-744
016-745
016-749
016-753
016-755
016-764
016-766
016-767
016-791
016-795
016-797
016-920
016-921
What You Can Do
Open the ADF cover. Remove the jammed paper and then close the ADF cover.
See also:
• "Clearing Paper Jams From the ADF" on page 268
Replace the specified toner cartridge.
See also:
• "Replacing Toner Cartridges" on page 324
Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local
representative office or an authorized dealer.
See also:
• "Online Services" on page 339
Select OK to clear the message. Check if the SMTP server setting is correct by contacting your
server administrator.
Select OK to clear the message. Check if the user name and password for the POP3 server are set
correctly by contacting your server administrator.
Select OK to clear the message. Check if the SMTP server address and e-mail destination are set
correctly.
Select OK to clear the message. Check if the user name and password used for the SMTP server
are set correctly by contacting your server administrator.
Select OK to clear the message. Retry when the printer does not process any job.
Select OK to cancel the current job. Retry when the printer does not process any job.
Select OK to clear the message. If this does not solve the problem, contact the Fuji Xerox local
representative office or an authorized dealer.
See also:
• "Online Services" on page 339
Select OK to cancel the current job. Retry when the printer does not process any job.
PDL emulation error has occurred. Select OK to clear the message and cancel the current print job.
Check if the password is correct.
Select OK to clear the message. Check if the Ethernet cable is properly connected. If this does not
solve the problem, contact SMTP server administrator.
Select OK to clear the message. Ping the IP address of the SMTP server and check if the server is
available. If this does not solve the problem, contact SMTP server administrator.
Select OK to clear the message. Check if the recipient address is correct, and try scanning again.
Insert the USB storage device and select OK to clear the message.
Select OK to clear the message. Check if the file format is correct.
Select OK to clear the message. Check if the USB storage device is securely connected.
Select OK to clear the message. Check the wireless setting for the access point and the printer, and
try wireless settings again.
Troubleshooting 305