Understanding Printer Messages - Fuji Xerox DocuPrint CP315 dw User Manual

5.4 Understanding Printer Messages

The operator panel displays error messages describing the current state of the printer and indicates possible
printer problems you must resolve. This chapter provides a list of status codes, and informs you what you can do
to clear error messages. When you contact customer support about an error, have the status codes and
messages ready.
Important
• When an error occurs, the print data remaining on the printer and the information accumulated in the memory of the
printer may be corrupted.
Note
• A status code is listed in an error message.
• For status codes that are not listed in this chapter, see instructions in each error messages.
Status-Code
004-310
010-397
016-338
016-404
016-405
016-520
016-521
016-541
016-542
016-543
92
User Guide
What you can do
Turn off the printer. Make sure that the tray is correctly installed, and then turn on
the printer. Contact customer support if this failure is repeated.
An error has occurred in the fusing unit. Turn off the printer, and then turn it on
again. Contact customer support if this failure is repeated.
Turn off the printer, and then turn it on again. Contact your system administrator if
this failure is repeated.
The certificate DB is invalid. Contact your system administrator. Press the
button to start initialization, and then restart the printer.
Refer
• For details, see "Digital Certificate Problems (P.160)."
Security setting mismatch. Initialize the security setting, and then restart the
printer by turning off the printer and then on again. Contact your system
administrator for the security resetting.
The certificate of the printer is invalid. Contact your system administrator. Reset
the certificate from other connectable clients with CentreWare Internet Services. If
no device can be connected, disconnect the Ethernet cable, turn off the IPsec, and
then reset the certificate with CentreWare Internet Services.
The certificate of the destination client is invalid. Contact your system
administrator. Check the certificate of the destination client and reset.
A wireless certificate of the server or client cannot be correctly referenced while
using Wireless LAN WPA-Enterprise or WPA2-Enterprise. Ask your system
administrator to connect the printer with a wired network, initialize the wireless
settings, import the wireless certificate, and then set WPA-Enterprise or
WPA2-Enterprise again.
A server certificate error has occurred when acquiring the certificate with the
operation of WPA-Enterprise or WPA2-Enterprise. This is a problem in the server
certificate, such as the validity period has expired for the server certificate being
used with the Radius server. Ask your system administrator to check the server
certificate being used with the Radius server.
A wireless certificate of the server or client corruption error has occurred while
using the Wireless LAN WPA-Enterprise or WPA2-Enterprise. Ask your system
administrator to connect the printer with a wired network, initialize the wireless
settings, import the wireless certificate, and then set WPA-Enterprise or
WPA2-Enterprise again.