Exit Power Saver; Setting The Power Saver Options; Auto Resume After Pause - Xerox Color 800i System Administration Manual

System Settings

Exit Power Saver

Select one of two options:
• Automatically: Select this option if you want the system to automatically exit from
power saver mode whenever the mouse, keyboard, PC power switch, or print engine
power switch is activated.
• Manually: Select this option if you want to manually exit the system from power
saver mode when the power saver button on the main UI screen is selected.
Note
To manually exit the power saver mode, press and release the power button on the
system PC.

Setting the power saver options

1. Logon as Administrator.
2. Select the System Settings button.
3. Select the System tab.
4. Uncheck the power saver options that you do not want enabled for your machine.
The system default is enabled (checked) for the Print Engine Only and Print Engine
Only If No PC Communication For options.
5. Use the up or down arrow buttons to change the time for each of the power saver
features:
• System PC & Print Engine
• Print Engine Only
• Print Engine Power Only If No PC Communication For
The range available is 1-240 minutes.
Note
The system default time is 60 minutes for System PC & Print Engine and Print Engine
Only. The system default time for Print Engine Only If No PC Communication For is
ten minutes.
6. Select the desired Exit Power Saver option.
7. Select OK to save your changes and close the System Settings window.
8. Select Logoff to exit the Administrator mode.
Related Topics:
Logging on as Administrator

Auto resume after pause

Use the Auto Resume After Pause feature to restart a job automatically after the Pause
button is selected on the UI and the job is waiting for user instruction.
1. Logon as Administrator.
5-12 Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses
System Administration Guide