System Pc & Print Engine; Print Engine Only; Print Engine Only If No Pc Communication For - Xerox Color 800i System Administration Manual

- Print Engine Only

- Print Engine Only If No Communication For
• Exit Power Saver
- Automatically
- Manually
The machine and/or system PC exits the power saver mode when a job is sent from the
print server to the machine or when the system PC UI is activated.
Note
The System PC & Print Engine and Print Engine Only features must be enabled
by your Xerox Representative before you can use them. If these features are not enabled,
call your Xerox Representative for more information.
Related Topics:
System PC & Print Engine
Print Engine Only

Print Engine Only If No PC Communication For

Exit Power Saver
Setting the power saver options
System PC & Print Engine
In this mode, the power to the UI and fuser unit is lowered to save power. The PC UI
display goes black, and the print engine enters power saver mode. To exit the power
saver mode, either send a job from the print server to the machine or press the print
engine power switch to the on position.
Print Engine Only
In this mode, the power to the UI and fuser unit is lowered to save power. The PC UI
display remains on, and the Power Saver button on the UI lights. To use the machine
press the Power Saver button on the UI. The Power Saver button goes out to indicate
that the power saver feature is canceled.
Print Engine Only If No PC Communication For
Use this feature when there is no communication between the PC UI and the print engine
for a specific amount of time. This will cause the print engine to enter the sleep mode.
The PC UI display remains on, and the Power Saver button on the UI lights up.
Xerox ® Color 800i/1000i Presses Xerox
System Administration Guide
® Color 800/1000 Presses
System Settings
5-11