Xerox Color 800i System Administration Manual page 71

2. Select the Profiles button.
The Profiles window opens.
3. Select the Fold Adjustment tab.
The Fold Adjustment option is displayed.
4. Select either the New or Edit button.
If you are editing an existing fold adjustment, select the desired profile from the list
and then select the Edit button.
The Fold Adjustment Profile Properties window opens.
5. Type in a new name, or if desired, edit the existing name.
It is recommend that you use a name such as Single Fold Plain or something that
indicates the fold type.
6. From the pull-down menu, select the desired fold type.
7. Select desired settings such as Size, Coating, and Weight.
8. Select the Test Print button.
The Fold Adjustment Test Print window displays.
9. Select the desired tray, and then select the Start button.
A Test Print status button is displayed while the print process occurs.
Upon completion of the test prints, the next Fold Adjustment Test Print screen displays.
This screen will vary depending on the selected Fold Type.
10. Obtain the printed samples from the output area of the machine.
11. Measure the sample output and record both z-fold, half-sheet positions on a sheet
of paper.
12. Enter the measurement values that you obtain during the previous step in the "A"
Length window and/or the "B" Length window by using the up/down arrow buttons.
13. Select the Start button.
A Test Print status button is displayed while the print process occurs.
Upon completion of the test prints, the following window appears:
Xerox ® Color 800i/1000i Presses Xerox
System Administration Guide
® Color 800/1000 Presses
Profiles
6-21