Xerox Color 800i System Administration Manual page 56

Profiles
6. Select the Auto Alignment button.
7. Next select the appropriate tray, profile name and the Start button.
The press will run test print and perform the automatic adjustments for you.
Obtain the test patterns printed and ensure the registration is acceptable. If not,
rerun the automatic alignment or manually adjust the profiles as required.
8. Select OK to return to the Profile Properties screen.
The automated adjustments for Registration, Perpendicularity, Skew, Magnification
are shown.
9. Select the Test Print button.
The Test Print window opens.
10. Select the desired Test Print options, including:
a) For the Test Pattern, select PH-Regi
b) The desired paper tray
c) Print quantity
6-6 Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses
System Administration Guide