Auto Logoff; Attention Sounds - Xerox Color 800i System Administration Manual

2. Select the System Settings button.
3. Select the System tab.
4. For the Auto Resume After Pause option, use the up or down arrow buttons to change
the time (minutes and seconds). The range for minutes is 0-60, and the range for
seconds is 0-59.
The system default time is two minutes.
5. Select OK to save your changes and close the System Settings window.
6. To exit the Administrator mode, select the Logoff button.
Related Topics:
Logging on as Administrator

Auto logoff

Use the Auto Logoff feature to have the machine automatically return to the printing
mode when no action is taken from any of the administrator functions after the set
amount of time.
1. Logon as Administrator.
2. Select the System Settings button.
3. Select the System tab.
4. To enable Auto Logoff, select the checkbox to the left of it.
5. Use the up or down arrow buttons to change the time. The range available is 1-60
minutes.
6. Select OK to save your changes and close the System Settings window.
7. To exit the Administrator mode, select the Logoff button.
Related Topics:
Logging on as Administrator

Attention Sounds

The Attention Sounds option allows you to select whether or not to sound an alarm
when a fault occurs on the machine.
1. Logon as Administrator.
2. Select the System Settings button.
3. Select the System tab.
4. To enable Attention Sounds, select the check box to the left of Enable Sounds.
5. From the Volume pull-down menu, select the desired option (High, Medium, Low).
6. From the Number of Beeps pull-down menu, select either 5 Beeps or Until User
Intervenes.
7. Select OK to save your changes and close the System Settings window.
8. To exit the Administrator mode, select the Logoff button.
Related Topics:
Logging on as Administrator
Xerox ® Color 800i/1000i Presses Xerox
System Administration Guide
® Color 800/1000 Presses
System Settings
5-13