Xerox Color 800i System Administration Manual page 64

Profiles
11. Measure the sample output and record the bi-fold position on a sheet of paper.
12. From the UI select the correct the bi-fold position for either the single sheet or multiple
sheet option:
• Left Side of Fold is Longer
• Right Side of Fold is Longer
• Left and Right Sides are Equal
13. If either the Left Side or Right Side (of Fold is Longer) is selected, enter the
measurement value that you obtain during the previous step in the "A" Length window
by using the up/down arrow buttons.
14. Select the Start button.
A Test Print status button is displayed while the print process occurs.
Upon completion of the test prints, the following window appears:
15. Select either:
a) Done Adjusting: Select this if the output meets customer satisfaction.
This closes the current window and returns you to the main Fold Adjustment
window. The new/edited fold adjustment profile is displayed in the Fold Adjustment
window.
b) Continue Adjusting: Select this if the output does not meet customer satisfaction
and requires further adjusting.
6-14 Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses
System Administration Guide