Output Devices; High Capacity Stacker Settings - Xerox Color 800i System Administration Manual

System Settings

Output Devices

This tab is available only when specific finishing devices are attached, such as the High
Capacity Stacker or the Perfect Binder.
Related Topics:

High Capacity Stacker Settings

Perfect Binder Settings
Selecting the Output Device options
High Capacity Stacker Settings
Use the Output Devices feature to set specific HCS output settings, including:
• Auto Output Switching: This option sets whether or not to allow the automatic
switching of the output destination from a full HCS to second HCS while jobs are
printing or when the Unload button on the HCS is pressed.
- Enable: Select this setting to allow the job output to automatically switch from
one HCS to another HCS.
- Disable: This is the default setting. Select this option if you do not want automatic
switching from one HCS to another HCS during print jobs.
5-16 Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses
System Administration Guide