Maintenance Tab; Dry Ink/Toner Cleaning - Xerox Color 800i System Administration Manual

Maintenance on UI
Note
The machine does not interrupt a job or stop running if a Technical Key Operator
Replaceable Unit (TKORU) status indicates a low or depleted level. Your TKORU may
continue to perform as expected far beyond the average life indicator. The Technical
Key Operator (TKO) uses this status indicator information each time service is performed
on your machine.
Important
The charge corotrons and drum cartridges can be replaced ONLY by a trained, qualified
Technical Key Operator (TKO)

Maintenance tab

Selecting the Maintenance tab opens a window which displays options for cleaning
particular components inside your machine. The Maintenance screen is divided into two
sections; Charge Corotron Cleaning, and Dry Ink Cleaning.
The Maintenance cleaning options are listed below:
• Charge Corotron Cleaning: Allows you to clean one or all of the charge corotrons.
You may want to run this cleaning procedure if you are having certain image quality
issues, such as banding or mottling. Refer to the User Guide, the Problem
solving/Image quality section for more information.
• Dry Ink Cleaning: Allows you to clean one or all of the dry ink/toner cartridge systems.
You may want to run this cleaning procedure if you are having certain image quality
issues, such as white or dark spots or blotches on the prints. These spots or blotches
are caused by dry ink/toner adhering to the drum. Refer to the User Guide, the Problem
solving/Image quality section for more information.
Related Topics:

Dry ink/toner cleaning

Charge corotron cleaning
Dry ink/toner cleaning
The following cleaning procedure purges the system of any residual dry ink/toner clumps
that possibly collected in the devleoper module.
Perform the following steps to clean one or all of the dry ink/toner cartridge dispensers.
Note
It is recommended that you run a few test prints before performing the cleaning
procedure. After the Start Cleaning button is selected, the system automatically generates
a test print. This allows you to compare the before and after prints for image quality.
1. Logon as Administrator.
2-2 Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses
System Administration Guide