Power Off; Power Saver; Locating The Machine Serial Number - Xerox 770 User Manual

Product overview
2. Press the power switch to the On position.
The Please wait... message indicates that the machine is warming up. The machine
cannot be used while it is warming up.

Power off

1. Press the power switch to the Off position.
2. Verify that the UI display is switched off completely, before switching on the machine
again.

Power Saver

The Power Saver feature has two modes:
• Low Power: If the machine remains inactive for a preset period of time, it enters the
Low Power mode.
• Sleep Mode: After the machine enters Low Power, and remains inactive for another
preset period of time, it then enters Sleep Mode.
Here are two examples:
• If Low Power Mode is set to 15 minutes and Sleep Mode is set to 60 minutes, Sleep
Mode activates after 60 minutes of total inactivity, not 60 minutes after Low Power
Mode begins.
• If Low Power Mode is set to 15 minutes and Sleep mode is set to 20 minutes, Sleep
Mode activates 5 minutes after Low Power Mode begins.
Exiting Power Saver mode
The machine's Power Saver mode is exited by:
1. Pressing the Power Saver button on the control panel, or
2. By sending a print job to the machine.

Locating the machine serial number

The machine serial number can be accessed from either the machine's UI or by locating
it on the inside of the machine.
1. Press the Machine Status button on the UI.
2. Ensure that the Machine Information tab is displayed.
The machine serial number is found here.
3. The machine serial number can also be found on the serial number plate inside the
front doors of the machine.
1-12 ®
Xerox 770 Digital Color Press
User Guide