Paper Curl Correction Options - Xerox Color 800i System Administration Manual

Paper curl correction
Note
It is important to remember that a successful paper curl correction setting used today
may not be the same setting that you would use on another day. This is especially
relevant if the room in which machine is located experiences changes in temperature
and humidity.

Paper Curl Correction options

The Paper Curl Correction options from the Advanced Stock Setup window include:
• 1 Sided-Face Up: This option allows you to set specific paper curl information for
one-sided only printed output which exits the machine in the face up position.
• 1 Sided-Face Down: This option allows you to set specific paper curl information for
one-sided only printed output which exits the machine in the face down position.
• 2 Sided: This option allows you to set specific paper curl information for two-sided
printed output.
Tip
Changing the default setting should be considered a temporary solution because
environmental conditions vary from day to day. It is recommended that upon completion
of the print job, you return the option to its default setting.
Related Topics:
1 Sided-Face Up option
1 Sided-Face Down option
2 Sided option
Correcting the paper curl
4-2 Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses
System Administration Guide