Adjusting Automatic Tone Reproduction Curve - Xerox Color 800i System Administration Manual

System Settings
The Full Width Array provides these features:
• Automatic Tone Reproduction Curve Adjustment: Run this adjustment on a daily
basis in order to ensure that your machine maintains the best image quality with less
or no down-time for color-critical jobs. This in turn enhances the machine s overall
productivity.
• Automatic Density Uniformity Adjustment: Run this image quality adjustment
when the printed output density is inconsistent (non-uniform) within the printed
page; non-uniform, inconsistent density may appear as faded colors on portions of
the printed page. Running this adjustment to correct this non-uniformity density may
avoid a service call and possible machine down-time
• Automatic Alignment: Use this feature to adjust the image-to-paper placement on
your printed output. This includes adjusting 1-sided and/or 2-sided image registration,
perpendicularity, skew and magnification. For more information, refer to
Alignment (Full Width Array)
Related Topics:

Adjusting Automatic Tone Reproduction Curve

Adjusting Automatic Density Uniformity
Adjusting Automatic Tone Reproduction Curve
1. Logon as Administrator.
2. Select the System Settings button.
3. Select the Full Width Array tab.
4. Select the Auto Adjust button for Automatic Tone Reproduction Curve Adjustment.
5. Select the appropriate halftone and then select the Next button.
6. Select the required options:
5-20 Xerox ® Color 800i/1000i Presses Xerox
Automatic
® Color 800/1000 Presses
System Administration Guide