Setting The Date And Time; System - Xerox Color 800i System Administration Manual

System Settings
Stock Library feature is available only to the administrator and is displayed on the
main UI only when the Administrator is logged on.
4. Select OK to save your changes and close the System Settings window.
5. To exit the Administrator mode, select the Logoff button.
Related Topics:
Logging on as Administrator

Setting the date and time

Use this feature to set the date and time for the system. The date and time is displayed
on the Machine Details screen on both the Installed Software and Error Log screens.
1. Logon as Administrator.
2. Select the System Settings button.
3. From the System Settings window, select the Date/Time tab.
4. Select the Date Format you wish to use.
5. Use the up or down arrow buttons to enter the correct year, month, and day.
6. Select the Time Format you wish to use.
7. Use the up or down arrow buttons to set the correct hour and minutes.
Note
If you selected the 12 Hour Clock, select the AM or PM button.
8. Select OK to save your changes and close the System Settings window.
9. To exit the Administrator mode, select the Logoff button.
Related Topics:
Logging on as Administrator

System

Use this feature to change the factory default settings for Productivity Mode, Power
Save Mode, Auto Resume, Auto Logoff, Attention Sounds and to enter NVM Read/Write
values when using specialized media.
Related Topics:
Productivity Mode
NVM Read/Write
Power Saver
Auto resume after pause
Auto logoff
5-6 Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses
System Administration Guide