Security Menu - NEC EXPRESS5800/120Re-2 Service Manual

Security Menu

Note:
a password for entering Setup. The passwords are not case
sensitive.
Choices or
Feature Display Only
User Password is Installed
Not Installed
Administrator Installed
Password is
Not Installed
Set Admin Up to 7
Password alphanumeric
characters
Set User Up to 7
Password alphanumeric
characters
Password On Disabled
Boot
Enabled
Fixed Disk Boot None
Sector
Write Protect
Secure Mode 1 minute
Timer
2 minutes
5 minutes
10 minutes
20 minutes
60 minutes
120 minutes
Security Hot Key L
CTRL-ALT-
Z
Secure Mode Disabled
Boot
Enabled
Power Switch Disabled
Inhibit
Enabled
Enabling the Supervisor Password field requires
Description
Indicates whether the user password is set
(view only).
Indicates whether the administrator password
is set (view only).
Press Enter to display the administrator
password entry screen. With the administrator
password, all SETUP menus are available for
access. This option is available only when
you log into the SETUP utility with the
administrator password.
Press Enter to display the user password
entry screen. With a user password, only
certain menus are accessible. This option is
available only if the Administrator Password is
specified.
Specify whether to request a password entry
at boot-up. Administrator password setup is
required.
Prevents data from being written to IDE hard
disks. The server does not support IDE hard
disks.
Set the period from no input from the
keyboard or mouse to the point at which the
system enters into the secure mode. If this
item is set to "Disabled," the system does not
enter the secure mode.
Specify the hot key to invoke secure mode
features. Pressing the assigned key along with
Ctrl and Alt invoke secure mode. This option
is enabled when User Password is set.
Specify whether the system boots in secure
mode. This option is enabled when User
Password is set.
Enables or disables the POWER switch. If
"Enabled" is selected, power-off with the
POWER switch becomes unavailable after OS
boot-up. (Forced shut down also becomes
unavailable. Forced shut down is a feature to
shut down by pressing the POWER switch for
at least four seconds.)
Your Setting
Configuring Your System 3-11