10. Close and lock the retainer clip. See Figure 4-29.
C
A
Figure 4-29. Closing and Locking the Retainer Clip
11. Align the riser card with the slot on the system board, and firmly push the
riser card until it is fully seated. See Figure 4-30.
A
4-30 Disassembly and Reassembly
D
A
Low-profile riser card
B
Full-height riser card
C Retainer Clip
D Locking Tab
A
Low-profile riser card
B
Full-height riser card
Figure 4-30. Installing the Riser Cards
C
B
B
D