Installation Preparation - NEC EXPRESS5800/120Re-2 Service Manual

Installation Preparation

Before starting the installation procedure, you need to obtain certain information
for use during the installation. Table B-2 lists the information you need in
advance for the installation. It is recommended that you obtain the information
from your server administrator and record it in Table B-2 before starting.
After completing the installation, you might want to use the Windows 2000
Control Panel to configure additional devices or Windows 2000 services and
facilities.
Item Information Required
1 Name of the Windows 2000 user.
2 Name of the licensed organization.
3 Product Key number for Microsoft
Windows 2000 Server Software.
This number is on the Certificate of
Authenticity included with your
Windows 2000 Server Software.
4 Name that you assign to the server.
5 Obtain your network configuration
information. For example, if network
settings are to be customized:
TCP/IP Configuration values such
as IP address values, DNS and
WINS address resolution facilities,
DHCP Relay and Routing
configuration values.
6 The name of any Administrative
Domain or Workgroup that this
server is to be a member of.
B-4 Installing and Configuring Windows 2000
Table B-2. Advanced Information
Enter Your Information Here