10.12 SCANNING
Allows the user to select the scan type from Memory scan or Priority scan.
"Memory scan" scans the channels that were programmed into memory. "Pri-
ority scan" scans the channels programmed in memory with the priority chan-
nel.
10.12.1 Selecting the Scan Type
1. Press and hold down the [ CALL ( MENU )] key until
"
Radio Setup
Radio Setup
Radio Setup
Radio Setup
Radio Setup
2. Press the [ ENT ] key, then select "
"
Radio Setup
Radio Setup
Radio Setup
Radio Setup
Radio Setup
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select "
ity ity ity ity ity
" or "
Memory
Memory
Memory
Memory
Memory
5. Press the [ ENT ] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
10.12.2 Memory Scanning ( M-SCAN )
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
CHANNEL selector knob. Press and hold the
[ SCAN ( MEM )] key for one second, "MEM" will ap-
pear on the LCD which indicates the channel has
been programmed into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver's memory, select the channel
then press and hold the [ SCAN ( MEM )] key for one second, "MEM" will
disappear in the LCD.
5. To start scanning, just press the [ SCAN ( MEM )] key
momentarily. "
ning will proceed from the lowest to the highest pro-
grammed channel number and will stop on a chan-
nel when a transmission is received.
6. The channel number will blink during reception.
7. To stop scanning, press the [ 16/9 ] or [ WX ] key.
GX3000S
" menu appears.
" menu with the CHANNEL selector
."
" appears on the LCD. Scan-
M-SCAN
M-SCAN
M-SCAN
M-SCAN
M-SCAN
" in the
SCAN Type
SCAN Type
SCAN Type
SCAN Type
SCAN Type
Prior-
Prior-
Prior-
Prior-
Prior-
Page 29