Position Send; Setting Up Position Send Ringer; Transmitting A Dsc Position Send Call - Standard Horizon MATRIX GX3000S Owner's Manual

11.9 POSITION SEND

The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to
another vessel. Your vessel must have an operating GPS receiver connected
for the GX3000S to send the position.
11.9.1 Setting up a Position Send Ringer
The GX3000S has the capability to turn off the Position Send ringer.
1. Press and hold down the [ CALL ( MENU )] key until
" Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
2. Turn the CHANNEL selector knob to select "
Setup Setup " menu.
Setup Setup Setup
3. Press the [ ENT ] key, then select "
the CHANNEL selector knob.
4. Press the [ ENT ] key.
5. Turn the CHANNEL selector knob to select "
Send Send Send ."
Send Send
6. Turn the CHANNEL selector knob to select "
7. Press the [ ENT ] key to store the selected setting.
8. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
If you wish to return to enabling the ringer tone, just re-
peat the above procedure, turning the CHANNEL se-
lector knob to select "

11.9.2 Transmitting a DSC Position Send Call

Pre-Programmable Calling
1. Press the [ CALL ( MENU )] key.
The " DSC Operation DSC Operation
DSC Operation DSC Operation DSC Operation
appear in the display.
2. Turn the CHANNEL selector
knob to select the "
3. Press the [ ENT ] key to select the Individual direc-
tory.
4. Turn the CHANNEL selector knob to select a name
in the directory, then press the [ ENT ] key.
5. Press the [ ENT ] key to send your position to the se-
lected vessel.
Page 56
" menu appears.
On On " in step "6" above.
On On On
" menu will
POS Send POS Send
POS Send POS Send POS Send
DSC Beep DSC Beep " with
DSC Beep DSC Beep DSC Beep
Off Off Off Off Off
."
DSC DSC DSC
DSC DSC
POS POS
POS POS POS
."
GX3000S