Receiving A Position Request - Standard Horizon MATRIX GX3000S Owner's Manual

11.8.3 Receiving a Position Request

When a position request call is received from another vessel, a ringing alarm
will sound and POS REQUEST will be shown in the LCD. Operation and trans-
ceiver function differs depending on "
setting.
Automatically reply:
1. When a position request call is received, a calling alarm sounds 4 times.
Then requested position coordinates are transmit-
ted automatically to the vessel requesting your ves-
sels position.
2. To exit from position request display, press any key.
Manually reply:
1. When a position request call is received from an-
other vessel, the LCD will be as shown in the illus-
tration at the right.
2. A ringing alarm sounds 4 times. Select type of reply
function " Send Send
Send Send Send
NEL selector knob.
The GX3000S display will show "
ply ply " allowing you to send your vessels location by using the CHANNEL
ply ply ply
selector knob.
3. When " Send Send Send
Send Send
transmitted to the requesting vessel.
4. To exit from position request display, press the [ 16/9 ] key.
GX3000S
" or " No Reply No Reply
No Reply No Reply No Reply
" is selected, press the [ ENT ] key. And your position will be
POS Reply POS Reply POS Reply POS Reply POS Reply
" by using the CHAN-
" or "
Send Send Send Send Send No Re- No Re- No Re- No Re- No Re-
" in the "
DSC Setup DSC Setup DSC Setup DSC Setup DSC Setup
" menu
Page 55