Navigation Indication; Intercom Operation - Standard Horizon MATRIX GX3000S Owner's Manual

switch to activate the tone through the HAIL/PA
speaker.
Rotate the CHANNEL selector knob to control the
AF output level. The AF output level can be set from
0 to 30 watts.
6. To exit the FOG HORN mode, press the [ PA/FOG ] or [ CLR ] key.

10.14 NAVIGATION INDICATION

The transceiver has the ability to display Time, SOG, COG, as well as the
position (LAT/LON), when connected to a GPS receiver.
1. Press and hold the [ H/L ( NAV )] key, display the posi-
tion information on the LCD. If the GPS receiver is
not receiving a fix, the display will be as shown in
the illustration on the right.
NOTE: When Ch16 is selected only lat/lon will shown.
2. To hide the position information, press and hold the
[ H/L ( NAV )] key again.

10.15 INTERCOM OPERATION

Connecting a CMP25 RAM+ or VH-310 handset to the GX3000S allows inter-
com communications. Refer to section "13.3 INTERCOM OPERATION" for
CMP25 RAM+ Microphone or section "14.3 INTERCOM OPERATION" for VH-
310 Handset.
RAM 2
RAM 1
M E M IC
WX
SCAN DW
CALL 16
NAV
SET
9
D ISTR E SS
PU L L OPEN
MATRIX RAM 1
Page 32
RAM 2
RAM 1
M E M IC
WX
SCAN DW
CALL 16
NAV
SET
9
D ISTR E SS
PU L L OPEN
MATRIX RAM 2
RAM 2
RAM 1
M EM IC
WX
SCAN DW
CALL 16
NA V
SET
9
D IS TR ESS
PUL L OPEN
RAM 1 RAM 2
RAM 2
RAM 1
M EM IC
WX
SCAN DW
CALL 16
SET NA V
9
DIS TR ESS
PUL L OPEN
ALL
GX3000S