Changing Gps Information To Vessel Position Or Cog; External Speaker Af Selection - Standard Horizon MATRIX GX3000S Owner's Manual

14.5.1 Changing GPS Information to Vessel position or COG

Allows customizing the NAV data showing GPS Information. Factory default is
"Your Vessel's Current Position," however, following the steps below the GPS
Information can be changed to "Course Over Ground (COG)."
1. Press and hold down the [ CALL ( MENU )] key until "
SETUP SETUP " menu appears.
SETUP SETUP SETUP
2. Press the [ ENT ] key, then select "
[ ] / [ ] key.
3. Press the [ CALL ( SET ) MENU ] key.
4. Press the [ ] or [ ] key to select "
rent Position)" or "
5. Press the [ ENT ] key to store the data entered, then press
the [ 16/9 ] key to exit this menu and return to radio opera-
tion mode.

14.5.2 External Speaker AF Selection

The AF SELECT AF SELECT AF SELECT
AF SELECT AF SELECT
External Speaker to "fixed" regardress the VOL level setting of the VH-310,
which is useful to the case when use with the amplified speaker, such as the
Standard Horizon MLS-310.
1. Press and hold down the [ CALL ( MENU )] key until "
" menu appears.
Setup Setup Setup
Setup Setup
2. Press the [ ENT ] key, then select "
[ ] key.
3. Press the [ ENT ] key.
4. Press the [ ] or [ ] key to select "
Level is "Fixed") or "
able").
5. Press the [ ENT ] key to store the data entered, then press
the [ 16/9 ] key to exit this menu and return to radio opera-
tion mode.
Page 82
Cru Cru Cru (Course Over Ground)."
Cru Cru
menu allows you to set the audio output level of the VH-310's
Po Po Po " (External Speaker Level is "Adjust-
Po Po
NAV DISPLAY NAV DISPLAY NAV DISPLAY " with the
NAV DISPLAY NAV DISPLAY
Pos Pos Pos (Your Vessel's Cur-
Pos Pos
" with the [ ] /
AF SELECT AF SELECT
AF SELECT AF SELECT AF SELECT
Pr Pr Pr Pr Pr " (External Speaker
RADIO RADIO RADIO
RADIO RADIO
Radio Radio Radio
Radio Radio
GX3000S