Using The Xtp System Configuration Software; Connections - Extron electronics XTP SR HDMI User Manual

1.
2.
3.
4.
5.
6.

Using the XTP System Configuration Software

The XTP SR HDMI can be controlled directly from the front panel Config port or remotely
from a connected XTP matrix switcher.

Connections

When opening the XTP System Configuration Software, the Connections screen opens
first. This screen is used to establish communication with an XTP device through a USB
connection (see
on before attempting to connect to it.
Figure 19.
1.
2.
3.
On the Extron website, click the
From the left sidebar, click the
figure 18, ).
2
Click the button (see figure 18,
Download Now
Submit any required information to start the download. Note where the file is saved.
Open the executable (.exe) file from the location where it was saved.
Follow the instructions that appear on the screen. By default, the installation creates a
directory in the appropriate Program Files folder named "Extron Electronics\XTP System
Configuration."
Config port on page 12). Ensure the receiver is connected and powered
Connections Screen
From the screen in the software, select the
Connections
figure 19, ).
1
Select the connected device to be controlled from the displayed list (see figure 19,
Click the button. The
Connect
XTP SR HDMI Scaling Receiver • XTP System Configuration Software
tab (see figure 18,
Download
XTP System Configuration Software
).
3
screen opens (see figure 19,
Device Settings
).
1
link (see
radio button (see
USB
2
).
3
).
30