Advanced Configuration Submenu; Front Panel Lockout Mode (Executive Mode) - Extron electronics XTP SR HDMI User Manual

Advanced Configuration Submenu

The
freezing, aspect ratio, and system reset.
Figure 15.
Test pattern — Rotate the adjustment knobs to select a test pattern. The available
test patterns are
Grayscale
Figure 16.
NOTE: All test patterns include a single pixel border.
Blank — Rotate the adjustment knobs to turn the blank screen feature on or off. When on,
the screen turns black, but the OSD menu is still available.
Freeze — Rotate the adjustment knobs to freeze or unfreeze the output.
Aspect ratio — Rotate the adjustment knobs to set the output aspect ratio to
Follow
entire output screen. When the aspect ratio is set to
input is maintained.
Factory reset — Press and hold the
The scaler retains the current firmware version.

Front Panel Lockout Mode (Executive Mode)

Executive mode locks all front panel controls (RS-232 and USB control are still available).
To enable or disable executive mode through the front panel, press and hold the
and
Executive mode
on page 29 for remote enabling or disabling of executive mode).
Advanced Configuration
Advanced Configuration Submenu
,
Crop Alternating Pixels
. The default setting is
Crop Alternating
Pixels
Test Pattern Examples
. When the aspect ratio is set to
buttons simultaneously for about 2 seconds or until the Power LED blinks (see
Enter
SIS commands on page 27 or
submenu is used to set test patterns, screen blanking and
,
4x4 Crosshatch
.
Off
4x4 Crosshatch Color Bars
, the output is sized and centered to fill the
Fill
Follow
button to reset the device to factory defaults.
Enter
XTP System Configuration Software
XTP SR HDMI Scaling Receiver • Operation
, , and
Color Bars
Grayscale
or
Fill
, the native aspect ratio of the
Menu
19