Figure 8-54. Insert Top Screws; Figure 8-55. Remove Center Screws; Figure 8-56. Insert Center Screws - Motorola APX 7000 Basic Service Manual

Sec 2: 8-32
IMPORTANT:
8.9.1.10 Assemble Speaker Grille Assembly (A)
1. Install the Speaker Grille (A) by inserting the top lip under the control top bezel and rotating
the grille into place. See
NOTE: Ensure the Memory Door (28) is in place and the memory door screw shaft is
2. Insert the two center screws (24) and torque to 10 in-lbs. See
For proper sealing, Speaker Module (B) must be held down during the
torquing of the screws.
Port Seal (20)
Figure 8-49. Insert Top Screws
Figure 8-50.
Figure 8-50. Remove Center Screws
aligned with the screw hole.
Center Screws (
Memory Door (28)
Figure 8-51. Insert Center Screws
Disassembly/Reassembly Procedures: Radio Reassembly
Top Screws (23)
Center Screws (24)
Memory Door (28)
)
24
Speaker Cone
Figure 8-51.