Motorola APX 7000 Basic Service Manual page 116

Sec 1: 8-28
8.8.9.2 FM Label (50)
NOTE: There is no need to remove any components in order to service the
1. Scrape off the FM Label (50) with the Black Stick.
2. Clean the area once the FM Label is completely removed to ensure it is free of adhesive and
debris.
3. Replace with a new FM Label.
4. Remove the liner and place the label in the recess.
5. Press the new label.
NOTE: There are No Other serviceable components on the Main Housing Assembly (D).
8.8.10 Servicing Main Housing (L) – Top Display Version
Front Housing Assembly (45)
Blank / FM Label (49)
8.8.10.1 Top Label
NOTE: There is no need to remove any components in order to service the Top Label (2).
1. Scrape off the Top Label (2) with the Black Stick.
2. Clean the area once the Top Label is completely removed to ensure it is free of adhesive and
debris.
3. Replace with a new Label.
4. Remove the liner and place the label in the recess.
5. Press the label.
8.8.10.2 Blank / FM Label (49)
NOTE: There is no need to remove any components in order to service the
1. Scrape off the bottom Label (49) with the Black Stick.
2. Clean the area once the bottom Label is completely removed to ensure it is free of adhesive
and debris.
3. Replace with a new Label.
Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies
FM Label (50).
Top Label (2)
Figure 8-38. Main Housing Assembly (Top Display Version)
bottom Label (49).