Sec 1: 8-34
8.9.1.5 Assemble Back Chassis Assembly (E, M)
Dual Display version:
1. Inspect the Back Chassis Assembly seal for any debris or foreign material.
2. Connect the Back Chassis Flex to the VOCON board (G).
3. Set the Back Chassis Assembly (E) onto the Main Chassis Assembly (K).
Back Chassis Assembly (20)
Top Display version:
1. Inspect the Back Chassis Assembly (M) seal for any debris or foreign material.
2. Set the Back Chassis Assembly (M) onto the Main Chassis Assembly (K).
8.9.1.6 Assemble Main Housing Assembly (D, L)
1. Stretch the Main Housing Assembly (D,L) side walls outward with both hands just enough to
clear the Main Chassis (K) and place it onto the radio.
2. Ensure the top edge of the housing and the bottom edge of the control top are aligned as
shown in
3. Squeeze the Main Housing Assembly (D,L) and the Main Chassis Assembly (K) in the battery
area until the Main Housing Assembly fully snaps in place onto the Main Chassis Assembly.
Figure 8-46. Place Back Chassis
Figure 8-47.
Stretch Outwards
Figure 8-47. Place Housing into Main Chassis
Disassembly/Reassembly Procedures: Radio Reassembly
Pull Belt
Connector