Select An Encryption Index; Erase An Encryption Key - Motorola APX 7000 Basic Service Manual

Encryption: Select an Encryption Index
7.4

Select an Encryption Index

This feature lets the user select one or more groups of several encryption keys from among the
available keys stored in the radio. For example, the radio could have a group of three keys structured
to one index, and another group of three different keys structured to another index. Changing indices
makes the radio automatically switch from one set of keys to the other. Every channel to which one
of the original keys was tied will now have the equivalent new key instead.
7.4.1 Use the Menu
To select an index using the menu:
1. Press
2. Press
-stored index, as well as the available index menu selections.
3. Press
user- selected and -stored index, as well as the available index menu selections.
4. Choose one of the following:
a. To save the index, press
b. To exit this menu without changing the index selection, press
the 16-Position Select knob.
7.4.2 Use the Keypad
To select an index using the keypad:
1. Press
2. Press
-stored index, as well as the available index menu selections.
3. Using the keypad, enter the number of the desired index.
4. Choose one of the following:
a. To save the index, press
b. To exit this menu without changing the index selection, press
the 16-Position Select knob.
7.5

Erase an Encryption Key

This section describes two methods for erasing an encryption key.
7.5.1 Method 1 – Key Zeroization (Multikey Only)
To zeroize an encryption key:
1. Press
2. Press
-stored encryption key, as well as the available menu selections that are listed in
3. Choose one of the following:
• If you want to erase all the encryption keys at once, go to step 4 below.
• If you want to erase a single encryption key, do one of the following:
>
until the display shows "INDX".
{ | }
, , or directly below "INDX". The display shows the last user-selected and
{ | }
, , or directly below the desired index. The display shows the last
{
>
until the display shows "INDX".
{ | }
, , or directly below "INDX". The display shows the last user-selected and
{
>
until the display shows "ERAS".
{ | }
, , or directly below "ERAS". The display shows the last user-selected and
| }
, , or directly below "SEL".
| }
, , or directly below "SEL".
Sec 1: 7-3
H
or the PTT button, or turn
H
or the PTT button, or turn
Table 7-1.