MN002952A01-AH
Chapter 5: Maintenance
Figure 15: Removing the Battery
5.7.2.4
Removing the Front Cover
Procedure:
1 Follow the sequence in
screws. Use a torque screwdriver with 6 IP Torx Plus bit and unscrew in a counterclockwise
direction.
Figure 16: Removing the Main Screws
2 Take note of the two catches in
catches one at a time by pulling the front cover toward the bottom of the radio while lifting
upward. A significant amount of force may be required to release the catches, but do not lift the
front cover completely as a flex is attached to it.
Figure 17: Removing the Front Cover
No.
1
3 Detach the OLED Display Flex board-to-board connector.
76
Figure 16: Removing the Main Screws on page 76
2
6
3
Figure 17: Removing the Front Cover on page
4
5
1
1
Description
Catches
to remove the
76. Release the