Motorola APX 7000 Basic Service Manual page 103

Disassembly/Reassembly Procedures: Radio Disassembly
4. If the RF Board Assembly (F) is to be removed, use the Black Stick to unplug the antenna
coax cable from the RF Board Assembly as shown in
5. Flip the radio over.
8.7.4 Removal of the Main Housing Assembly (D)
1. Gently stretch both sides of the Main Housing Assembly (1) outwards to clear the radio. Then
lift it over the radio as shown in
NOTE: For Top Display version, ensure the Belt Clip Cover (48) has been removed.
Figure 8-20. Remove Antenna Coax Cable Connector
Figure 8-21.
Stretch Outwards
Figure 8-21. Remove Housing
Figure 8-20.
Antenna Coax Cable Connector
Sec 1: 8-15