Select An Encryption Key - Motorola APX 7000 Basic Service Manual

Sec 1: 7-2
7.3

Select an Encryption Key

You can select an encryption key using either the menu or the keypad.
7.3.1 Use the Menu
To select an encryption key using the menu:
1. Press
2. Press
-stored encryption key, as well as the available menu selections.
3. Press
NOTE: If you select an erased key, the display alternates between showing the encryption
4. Press
• PSET = selects the preset or default encryption key.
• SEL = saves the newly selected key and returns to the home display.
5. Press
16-Position Select knob to exit this menu.
• If the selected key is erased, the display shows "KEY FAIL" and the radio sounds a
momentary keyfail tone.
• If the selected key is not allowed, the display shows "ILLEGAL KEY" and the radio sounds a
momentary illegal key tone.
7.3.2 Use the Keypad
To select an encryption key using the keypad:
1. Press
2. Press
stored encryption key, as well as the available menu selections.
3. Using the keypad, enter the number of the desired key.
NOTE: If you select an erased key, the display alternates between showing the encryption
4. Press
• PSET = selects the preset or default encryption key.
• SEL = saves the newly selected key and returns to the home display.
5. Press
16-Position Select knob to exit this menu.
• If the selected key is erased, the display shows "KEY FAIL" and the radio sounds a
momentary keyfail tone.
• If the selected key is not allowed, the display shows "ILLEGAL KEY" and the radio sounds a
momentary illegal key tone.
>
until the display shows "KEY".
{ | }
, , or directly below "KEY". The display shows the last user-selected and
< >
or to scroll through the list of encryption keys.
key and "ERASED KEY".
{ | }
, , or directly below the desired menu.
H
, the PTT button, or
>
until the display shows "KEY".
{ | }
, , or directly below "KEY". The display shows the last user-selected and
key and "ERASED KEY".
< >
or to select from the menu.
H
, the PTT button, or
{ | }
, , or directly below the ABRT menu, or turn the
{ | }
, , or directly below the ABRT menu, or turn the
Encryption: Select an Encryption Key