Figure 8-6. Attaching Battery - Memory Door; Figure 8-7. Attaching Battery - Slide Into Position - Motorola APX 7000 Basic Service Manual

Sec 1: 8-8
2. Verify that the Memory Door (33) is closed by ensuring the door is fully seated and the catch
feature on the tab is in the main chassis notch.
3. Set the battery onto the chassis as shown in
both battery latches click into position.
Figure 8-6. Attaching Battery – Memory Door
Figure 8-7. Attaching Battery – Slide into Position
Disassembly/Reassembly Procedures: Battery
Memory Door
Figure 8-7. and slide into position. Make sure