Sec 1: 8-44
8.10.9.3 Battery Contact Seal
• If leak occurs due to damage to the Battery Connector Seal (41), it will need to be replaced.
8.10.9.4 Back Chassis
• If leak occurs through the Color Display Lens (22), replace it.
• If leak occurs elsewhere on the Back Chassis (E/M), it will need to be replaced.
8.10.9.5 Control Top
• If leak occurs through the antenna or the Control Top Seal (10), replace it.
• If leak occurs elsewhere on the Control Top Assembly (J), it will need to be replaced.
8.10.9.6 Main Chassis
• If leak occurs on the Back Chassis (E/M), it will need to be replaced.
Disassembly/Reassembly Procedures: Ensuring Radio Submergibility