Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies
8.8.7
Servicing Back Chassis Assembly (E)
Back Chassis Assembly (17)
NOTE: There are No serviceable Components on the Back Chassis Assembly.
8.8.8
Servicing Main Housing (D)
8.8.8.1 Blank/FM Label (2)
NOTE: There is no need to remove any components in order to service the Blank/FM Label
1. Scrape off the Blank/FM Label (2) with the Black Stick.
2. Clean the area once the label is completely removed to ensure it is free of adhesive and
debris.
3. Replace with a new label.
4. Remove the liner and place the label in the recess.
5. Press the label.
NOTE: There are No Other serviceable components on the Main Housing Assembly (D).
Figure 8-33. Back Chassis Assembly
Main Housing Assembly (1)
Blank/FM Label (2)
Figure 8-34. Main Housing Assembly
(2).
Sec 2: 8-23