Installing Dimm - Kyocera Mita FS-1800 User Manual

DIMM to be used
See your Kyocera Mita dealer for purchasing information of the DIMM that
are best suited for use with this printer.
Either a 8 MB, 16 MB, 32 MB, 64 MB, or 128 MB DIMM can be used for
memory expansion.
Installing and Removing The DIMM

Installing DIMM

Insert the DIMM into the socket as shown right.
Remove the DIMM from its package.
1
Open the clips on both ends of the DIMM slot.
2
Insert the DIMM into the memory slot, so that the notches on the
3
DIMM align with the corresponding protusions in the slot.
Close the clips DIMM slot to secure the DIMM.
4
When you have finished installing the DIMM, reinsert the main
5
board into the printer by reversing the removal procedure.
Clip
B-5
Expansion Memory Installation
DIMM
Socket
Clip