Changing The Emulation - Kyocera Mita FS-1800 User Manual

Operating the Operator Panel
Emulation
PCL 6
MENU
ENTER
ENTER
MENU

Changing the Emulation

>
The printer's current emulation mode on the current interface can be
changed by using the mode select menu.
1
Press the MENU key.
2
Press the
is indicated by one of following messages:
PCL 6 (Default)
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
3
Press the ENTER key. The message display shows a blinking
question mark (?).
Emulation
?PCL 6
4
Press the
is indicated.
If you want to abandon the selection, press the CANCEL key.
5
Press the ENTER key.
6
Press the MENU key and the message display returns to Ready.
After changing the emulation, you have the option to change the character
code set. The available character code sets vary depending on the current
emulation.
key and select Emulation. The current emulation
or
key repeatedly until the desired emulation mode
or
1-50