Duplex Mode - Kyocera Mita FS-1800 User Manual

3
?
4
5
ENTER
6
7
ENTER
8
MENU
Duplex Printing from the MP tray
In first mode, be sure to set the MP tray to the same paper size and paper
type as set for the current cassette. If the paper size or type differs, a paper
jam may result. Also note that it is not possible to select the MP tray as the
current cassette and perform duplex printing. We therefore recommend
that duplex printing be performed from the paper cassette.
Press the > key.
Press the key to display >Duplex mode >.
or
>Duplex mode
None
Press the ENTER key. The message display shows a blinking
question mark (?).
>Duplex mode
? None
Each time the
or
shown below.
None (default)
Short edge bind
Long edge bind
When the desired duplex mode displayed, Press the ENTER key.
Press the MENU key and the message display returns to Ready.
1-97
Operating the Operator Panel
>
>
key is pressed, the duplex mode changes as