Stack Select - Kyocera Mita FS-1800 User Manual

Operating the Operator Panel
>Stack Select
MENU
?
ENTER
ENTER
MENU
Selecting the Output Tray
>
You can select whether to output printouts to the face-down tray or to the
face-up tray. Also, if an option sorter is installed, they can also be selected.
1
Press the MENU key.
2
Press the
Paper Handling >
3
Press the > key.
4
Press the
>Stack Select
Face-down tray
5
Press the ENTER key. The message display shows a blinking
question mark (?).
>Stack Select
? Face-down tray
6
Each time the
shown below.
Face-down tray (Printer's face-down tray) [Default]
Face-up tray (Printer's face-up tray) [Option face-up tray PT-60
required]
Option stacker (Displayed when option sorter SO-60 is installed)
7
When the desired paper source displayed, press the ENTER key.
8
Press the MENU key and the message display returns to Ready.
key and select Paper Handling >.
or
key to display >Stack Select >.
or
>
>
key is pressed, the duplex mode changes as
or
1-98